Beeld komt binnenkortDB2167Betrouwbare filtratie begint met geverifieerde specificaties.
Air Oil Separator Filter DB2167
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
DB2167 is a high-performance externally wound air/oil separator core designed specifically for heavy-duty industrial screw air compressors. Developed and manufactured by Sotras, an Italian…
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 700 mm |
|---|---|
| Buitendiameter | 299 mm |
| Binnendiameter | 221 mm |
| Filtratieprecisie | 10μm-15μm |
| Flang-buitendiameter | 355 mm |
| Aanvankelijk drukverschil | 0.15 - 0.25 bar |
| OEM / kruisverwijzing | 4930653102,4930652102,9610112-24001M |
| Bedrijfstemperatuur | 120°C |
DB2167 is a high-performance externally wound air/oil separator core designed specifically for heavy-duty industrial screw air compressors. Developed and manufactured by Sotras, an Italian industrial filter manufacturer, it is mainly installed inside the air-oil tank of air compressors to thoroughly separate micron-sized lubricating oil mist mixed in compressed air, ensuring clean, oil-free compressed air for downstream gas consumption points.
Core Values and Functions
• Ensure Air Purity: Control the residual oil mist in compressed air within an extremely low range of 1 - 3 ppm to protect downstream high-precision filters, dryers and pneumatic equipment from oil contamination.
• Reduce Lubricating Oil Consumption: Adopt an extremely efficient coalescing recovery mechanism, so that the separated lubricating oil can flow back to the airend for recycling, greatly cutting the maintenance cost of frequent oil refilling.
• Lower System Energy Consumption: Feature an optimized structural design with an initial pressure drop of only 0.15 - 0.25 bar. Low resistance means the air compressor consumes less electric power when discharging the same air volume.
Installatienotities
Anti-static (gasket grounding): DB2167 is normally equipped with graphite gaskets fitted with conductive metal pins. Do not scrape off, misplace or omit these conductive pins/stainless steel sheets during installation. Ensure absolute metal contact between the metal housing of the separator core and the flange of the air compressor oil-gas barrel. Failure of static conduction can easily ignite the oil-gas mixture inside the barrel and cause a flash explosion of the unit. Check the oil return pipe: When replacing a new filter element, the oil return pipe inside the barrel must be inspected. ◦ Check whether the one-way valve of the oil return pipe is clogged. ◦ Adjust the length of the oil return pipe so that its end is 2 to 3 millimeters above the bottom groove of DB2167. If it is too high, it cannot suck the accumulated oil at the bottom and will cause oil leakage; if it is too low, it will press and puncture the bottom of the filter element.
Onderhoud en vervanging
The initial pressure difference after installing a new filter element is usually 0.15 - 0.25 bar. ◦ When the oil separation pressure difference displayed on the control panel reaches 0.8 - 1.0 bar, it indicates that the filter element is significantly clogged and replacement should be prepared. ◦ Limit replacement point: The pressure difference must never exceed 1.2 bar. If this value is exceeded, the filter element risks being ruptured or crushed by high-pressure airflow at any time. The normal operating temperature should be maintained at 80°C - 95°C. ◦ The machine is strictly prohibited from running at a high temperature above 100°C for a long time; otherwise, it will accelerate the aging of the epoxy resin adhesive and sealing gaskets inside the separation core, resulting in premature oil leakage.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Kruisverwijzing
Reference information associated with this product. Contact us if you need help confirming a cross-reference number.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for DB2167 and our selection team will confirm compatibility, price and lead time.
Veelgestelde vragen
Hoe bevestig ik compatibiliteit zonder een merkreferentie van derden?
Geef het productnummer, afmetingen, verbindingsdetails, bedrijfsomstandigheden en informatie over de apparatuur. Ons team zal de aanvraag bevestigen.
Welke dimensies moet ik meten?
Meet de totale hoogte, buitendiameter, binnendiameter en schroefdraad of verbindingsgrootte. Een foto of tekening helpt de vervanging te bevestigen.
Hoe kies ik het juiste zegelmateriaal?
De keuze van de verzegeling hangt af van de filtermedia, de bedrijfstemperatuur en de chemische compatibiliteit. Wij kunnen de geschikte opties voor uw toepassing bevestigen.
Kunt u een productgegevensblad verstrekken?
Ja. Stuur het productnummer en de vereiste specificaties en wij bieden de beschikbare gegevensblad en selectie ondersteuning.



