
Betrouwbare filtratie begint met geverifieerde specificaties.
Lucht/oliescheidingselement 02250106-789
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
02250106-789 is a high-efficiency spin-on oil-gas separator element [02250106-789] specially designed for rotary screw air compressors. As a core consumable in the post-processing system of air compre
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 254 mm |
|---|---|
| Binnendiameter | 24 mm |
| Buitendiameter | 82,55 mm |
| Gewicht | 0,9 kg |
| Bedrijfstemperatuur | 120°C |
| Filtratieprecisie | 0,1 μm |
02250106-789 is een hoog rendement spin-on olie-gas separator element [02250106-789] speciaal ontworpen voor roterende schroefluchtcompressoren. Als een kern verbruiksgoederen in het post-verwerkingssysteem van luchtcompressoren, het keurt geavanceerde fysieke kolonisatie scheidingstechnologie grondig verwijderen van dichte smering olie mist uit perslucht. Op deze manier kan het schone, olievrije hoogwaardige energiebron leveren voor downstream pneumatische apparatuur en tegelijkertijd de terugwinning en recycling van smeerolie realiseren.
Kernpunten en voordelen
• Ultra-clean Uitlaat (High-precision Separation): keurt geïmporteerde superfijne glasvezel composiet filtermedia goed, die fijne olienevel van 0,1~1 micron nauwkeurig kunnen opvangen, waarbij het restoliegehalte in uitlaatgas strikt beperkt wordt tot ≤ 3 ppm. Het voorkomt in feite verontreiniging van productielijnproducten of storingen van nauwkeurige pneumatische componenten veroorzaakt door olieverontreiniging.
• Spin-on Convenient Design: Equipped with a spin-on (1"-12 UN thread) interface similar to automotive oil filters. Maintenance personnel can quickly unscrew and replace it using only a filter wrench, greatly shortening equipment downtime for maintenance.
• Low-energy Operation (Ultra-low Initial Pressure Drop): The optimized flow channel design and gradient structure of multi-layer filter media maintain the initial pressure drop at ≤ 0.02 MPa. The low-resistance feature means the air compressor main unit does not need to work against extra resistance, thereby significantly reducing power consumption.
• Explosion-proof Static Protection: A highly conductive built-in anti-static safety device is integrated inside the filter element. It can rapidly discharge static electricity generated by high-speed friction of airflow, completely eliminating the risk of flash explosion inside the oil-gas separator tank triggered by static sparks.
• High Pressure Resistance and Corrosion Resistance: The housing and internal supporting frame are made of thickened electroplated stamped steel parts, featuring excellent resistance to torsion and pressure pulsation. It maintains perfect structural integrity under normal working pressure above 1.3 MPa or continuous high temperature of 120°C.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
1.Complete pressure relief: Before replacement, the air compressor must be shut down and power disconnected. Do not start operation until the pressure gauge on the oil-gas barrel reads zero. 2. Lubrication with oil: Before installing the new filter element, apply a thin layer of clean air compressor lubricant to the surface of the new O-ring to prevent the seal from shifting, twisting or deforming during tightening, which would cause air and oil leakage. 3. Installation torque: Tighten by hand. Screw it by hand until the seal contacts the base, then use a professional filter wrench to turn it an additional 3/4 to 1 full turn. Do not over-tighten, as this may strip the threads or deform the seal. 4. Anti-static verification: Check whether the end cap gasket of the original or replacement filter element comes with built-in anti-static pins or metal strips, ensuring good contact with the machine base for static discharge.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for 02250106-789 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming 02250106-789 or comparing it with another reference? Use these selection resources before ordering.



