
Betrouwbare filtratie begint met geverifieerde specificaties.
Air Oil Separator Part 72-12302-0801-23
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 445 mm |
|---|---|
| Buitendiameter | 115 mm |
| Binnendiameter | 76 mm |
| Gewicht | 2.5 kg |
| Filtratieclassificatie | 0,1 μm |
| OEM / kruisverwijzing | KD120-051,SA463MY |
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air and the oil circuit circulation of the unit.
Core Advantages and Value
• Reduced oil consumption.
The residual oil content of the exported compressed air is controlled within 1~3 ppm, which significantly cuts lubricating oil loss and replenishment costs.
• Energy saving and consumption reduction.
Low initial pressure difference (≤ 0.02 MPa) and low airflow resistance help reduce the operating power consumption of the air compressor.
• Protection of downstream equipment.
It effectively prevents oil from entering dryers, precision filters and pneumatic actuators, extending the service life of the entire air source system.
Core Structure and Materials
• Multi-layer ultra-fine glass fiber filter media.
Imported composite glass fiber is adopted as the core filtration layer, featuring high dust holding capacity and oil mist capture efficiency, which can effectively intercept tiny oil droplets at the 0.1-micron level.
• High-strength rust-proof frame.
High-strength perforated metal support meshes are fitted on both inner and outer layers to withstand instantaneous pressure fluctuations during unit start-stop, loading and unloading, preventing the filter element from deformation or breakdown.
• Anti-static sealing design.
High-temperature resistant sealing gaskets and anti-static flow guide pieces (or conductive pins) are equipped on the flange end cover to avoid static accumulation caused by friction of high-speed airflow and improve the operation safety inside the oil-gas separation tank.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
Vervangen volgens drukdaling of onderhoudsschema. Controleer op lekkage en sealschade.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for 72-12302-0801-23 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming 72-12302-0801-23 or comparing it with another reference? Use these selection resources before ordering.



