
Betrouwbare filtratie begint met geverifieerde specificaties.
Air/Oil Separator OT 4373
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compresse
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 256 mm |
|---|---|
| Buitendiameter | 212.8 mm |
| Binnendiameter | 149.4 mm |
| Gewicht | 3.59 kg |
| Flang-buitendiameter | 300 mm |
| Filtratieclassificatie | 0,1 μm |
| OEM / kruisverwijzing | 1614.4373.00,1614437300,2911.0015.00,4900252131,P525530,DC 3015 |
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compressed air, ensuring efficient equipment operation and clean air supply.
Kernfuncties en werkbeginselen
• Efficient oil-gas separation.
It adopts an Out-In filtration flow direction. When compressed air carrying high-temperature and high-pressure oil mist passes through the filter element, the multi-layer ultra-fine glass fiber coalescing media can capture submicron oil droplets smaller than 0.1 micron.
• Oil coalescence and return.
The intercepted tiny oil droplets gradually coalesce into large oil beads inside the filter media, gather in the groove at the bottom of the filter element under gravity, and are then guided back to the lubrication system of the air compressor through the oil return pipe for recycling, greatly reducing oil consumption.
Structural Design and Quality Characteristics
• High-strength collapse-resistant frame.
Both the inner and outer layers are equipped with high-strength galvanized perforated steel support screens, which can withstand the instantaneous high pressure difference during air compressor startup and high-load operating conditions and prevent deformation or damage of the filter element.
• Safe static-conductive design.
The top flange is standardly fitted with an oil-resistant composite sealing gasket, and built-in metal static-conductive rivets and M8 grounding studs, which can safely conduct away static electricity generated by friction of high-speed airflow and eliminate the risk of static ignition inside the oil-gas tank.
• Low resistance and long service life. The initial operating pressure difference is usually lower than 0.2 bar. While maintaining low energy consumption, the residual oil content in exhaust gas is stably controlled within 1 – 3 ppm.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
Vervangen volgens drukdaling of onderhoudsschema. Controleer op lekkage en sealschade.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Kruisverwijzing
Referentieinformatie over dit product. Neem contact met ons op als u hulp nodig heeft om een kruisverwijzingsnummer te bevestigen.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for OT 4373 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming OT 4373 or comparing it with another reference? Use these selection resources before ordering.



