
Betrouwbare filtratie begint met geverifieerde specificaties.
Oliescheider Element B00670070070027
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
B00670070027 Oil Separator Filter is ingebouwd olie-gas scheidingscomponent speciaal ontworpen voor grote olie-injected schroeflucht compressoren. Geïnstalleerd in de olie-gas scheidingstank van de lucht com
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 304,8 mm |
|---|---|
| Buitendiameter | 274,6 mm |
| Binnendiameter | 200.2 |
| Filtratieclassificatie | 0,01 ~ 0,03 μm |
| Gewicht | 7,72 kg |
| Flang-buitendiameter | 355,6 mm |
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air compressor, it is responsible for deeply intercepting and separating the lubricating oil mist carried in the airflow before the compressed air enters the aftercooler and the gas consumption end, ensuring the cleanliness of downstream compressed air and realizing the recycling of lubricating oil.
Kernproductkenmerken
• High-precision deep filtration.
Adopting multi-layer superfine fiberglass composite filter media, it can effectively capture oil-aerosol particles at the level of 0.01 ~ 0.03 μm. The filtration efficiency reaches over 99%, ensuring the oil content in exhaust gas is controlled at ≤ 3 ppm.
• Low pressure differential energy-saving design.
The optimized pleated filter layer structure and high-permeability support net greatly reduce air flow resistance, with an initial pressure differential of only ≤ 0.02 MPa (approx. 0.2 bar), helping cut energy consumption loss during the loaded operation of air compressors.
• High-strength explosion-proof and pressure-resistant structure.
The inner and outer protective screens are made of high-strength galvanized carbon steel perforated plates. Combined with oil-resistant high-temperature end caps and special adhesives, it can withstand a maximum working pressure of 10 bar and scouring by high-temperature oil and gas, preventing the filter element from deforming or collapsing under high pressure differential.
• Static dissipation safety protection.
The flange plate is equipped with conductive gaskets or anti-static pins, which can promptly conduct static charges generated by high-speed friction of oil mist to the oil-gas tank shell, eliminating the risk of static sparks in the oil-gas mixed environment.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
Vervangen volgens drukdaling of onderhoudsschema. Controleer op lekkage en sealschade.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for B006700770027 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming B006700770027 or comparing it with another reference? Use these selection resources before ordering.



