
Betrouwbare filtratie begint met geverifieerde specificaties.
Air/Oil Separator KV360-003
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| OEM / kruisverwijzing | 6.1965.0, 6.2013.0, 6.4024.0,49 000 50 321, 49 000 51 321, 49 004 52 101, 49 004 52 102, 49 004 53 102,P52-5203, P53-0757P52-5203 , P53-0757 |
|---|---|
| Hoogte | 450 mm |
| Buitendiameter | 275 mm |
| Binnendiameter | 219 mm |
| Gewicht | 8,3 kg |
| Flang-buitendiameter | 328 mm |
| Filtratieclassificatie | 0,1 mm |
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as original filters of many mainstream brands, it is used to efficiently separate lubricating oil mist from compressed air, ensure the clean operation of the pneumatic system and reduce oil consumption.
Structuur- en materiaalkenmerken
• High-quality filter media.
The interior is wound with multiple layers of uniformly graded borosilicate glass microfiber. It features high dust holding capacity and low initial pressure drop (approximately 0.14–0.20 bar), which helps reduce the energy consumption of the air compressor.
• High-strength support structure.
Equipped with high-strength, rust-proof perforated inner and outer metal support screens and galvanized end caps. It can withstand pressure differential shocks up to 5 bar (70 psi) without collapse or deformation.
• Non-porous flange sealing design.
The top flange adopts a non-porous flat flange structure (outer diameter approx. 324–328 mm, total height approx. 450 mm), which is sealed by direct compression against the top cover of the oil-gas separation tank. Two oil-resistant sealing gaskets with conductive metal pins are usually supplied with the unit. They can naturally dissipate static electricity generated during filter operation after installation to ensure equipment safety.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
Vervangen volgens drukdaling of onderhoudsschema. Controleer op lekkage en sealschade.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Kruisverwijzing
Referentieinformatie over dit product. Neem contact met ons op als u hulp nodig heeft om een kruisverwijzingsnummer te bevestigen.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for KV360-003 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming KV360-003 or comparing it with another reference? Use these selection resources before ordering.



