
Betrouwbare filtratie begint met geverifieerde specificaties.
Lucht/oliescheidingsfilter 2205174796
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
2205174796 is a high-efficiency built-in air oil separator core specially designed for industrial screw air compressors. As a core consumable spare part in the compressed air system, it is mainly inst
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 610 mm |
|---|---|
| Binnendiameter | 150 mm |
| Buitendiameter | 206 mm |
| Bedrijfstemperatuur | 120 ℃ |
| Filtratieprecisie | ≤ 0,1 μm |
| Flang-buitendiameter | 297 mm |
2205174796 is een hoog-efficiënte ingebouwde lucht olie separator kern speciaal ontworpen voor industriële schroeflucht compressoren. Als een kern verbruiksreserveonderdeel in het persluchtsysteem wordt het voornamelijk in de olie-luchttank geïnstalleerd. Het is verantwoordelijk voor het grondig scheiden en condenseren van de hoge concentratie smeerolie mist in perslucht, ervoor zorgen dat de uiteindelijke output industriële perslucht schoon en olievrij is. Ondertussen herstelt het de gescheiden smeerolie in het systeem voor circulatie, om het olieverbruik van de apparatuur te verminderen en de levensduur van de gehele machine te verlengen.
Voordelen van het kernproduct
• Origineel-apparatuur-grade filtermedia met ultra-hoge scheidingsefficiëntie: De interne kern filterlaag keurt multi-layer microfiberglass ingevoerd uit HV (Hollingsworth & Vose) van de Verenigde Staten of Lydall van Zweden. De unieke structuur van de dieptekolenvorming kan het gehalte aan olienevel in uitlaatgas tot ≤ 3 ppm (minder dan 0,1 mg/m3) reduceren, hetgeen voldoet aan de eisen van industriële spuit-, pneumatische controle- en precisieproductie die een zeer hoge zuiverheid van de luchtbron vereisen.
• Lage druk val ontwerp voor opmerkelijke energiebesparing: Het element heeft een extreem lage initiële druk verschil (≤ 0,02 MPa). Zonder de luchtstroom te beïnvloeden, minimaliseert het de aerodynamische weerstand van het systeem, waardoor het energieverbruik van de luchtcompressormotor effectief wordt verminderd en de totale energie-efficiëntieverhouding wordt verbeterd.
• Triple safety protection to prevent deflagration:
◦ Anti-static design: Metal conductive sheets / static grounding buckles are standard on both end caps. It can effectively eliminate static electricity generated by friction of high-velocity airflow and prevent sparks from triggering deflagration inside the oil-gas tank.
◦ Reinforced support frame: The inner anti-corrosion high-strength perforated metal central pipe boasts strong pressure resistance and will not deform under high instantaneous reverse pressure difference.
◦ High-temperature resistant gasket: Special high-elasticity and heat-resistant graphite or fluororubber gaskets are equipped at the flange. They will not harden or leak air under continuous high temperature of 120 ℃ and long-term immersion in lubricating oil.
Installatienotities
Anti-static Earthing (Top Priority): This model comes with metal conductive pieces as standard. Do NOT tear off, bend, or omit the metal static pins/conductive strips on the flange gasket! If the flange, gasket and oil-gas barrel fail to establish reliable metal-to-metal earthing, static electricity generated by friction of high-velocity airflow can instantly break down the oil separator element, or even ignite oil-gas mixture, resulting in severe deflagration and barrel explosion accidents. • Gasket and Sealing Surface Inspection: During replacement, thoroughly scrape off all residual old gasket material from the contact surfaces of the oil-gas barrel cover and flange. Apply a small amount of lubricating oil to prevent air and oil leakage caused by gasket displacement during installation. • Scavenge Line Clearing: When refitting the oil-gas barrel cover, check whether the Scavenge Line is blocked and whether the nozzle length is appropriate. If the scavenge line cannot accurately reach the condensed oil level at the bottom of the filter element (or the clearance from the bottom is improper), the separated oil cannot be drawn back, leading to excessive oil carry-over in exhaust gas.
Onderhoud en vervanging
Replace based on time: Under standard working conditions, the design service life is 3000 - 4000 hours. Once this duration is reached, timely replacement is recommended even if there are no visible abnormalities, as the fine glass fibers may have become saturated or aged. • Replace based on pressure difference (core indicator): Closely monitor the oil separator pressure difference displayed on the control panel. Replacement must be carried out immediately when the pressure difference reaches 0.08 - 0.1 MPa (approximately 1 bar). Excessively high pressure difference will increase the motor load and sharply raise power consumption. In severe cases, the filter element may be ruptured.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for 2205174796 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming 2205174796 or comparing it with another reference? Use these selection resources before ordering.



