
Betrouwbare filtratie begint met geverifieerde specificaties.
Air-Oil Separator Element 4900051171
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
4900051171 is an original-quality built-in oil-gas separator filter element specially designed for industrial oil-injected screw air compressors and sliding vane compressors. It is installed inside th
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 442 mm |
|---|---|
| Buitendiameter | 220 mm |
| Binnendiameter | 65 mm |
| Gewicht | 4.56 kg |
| Flang-buitendiameter | 274 mm |
| Filtratieclassificatie | 0,1 mm |
4900051171 is an original-quality built-in oil-gas separator filter element specially designed for industrial oil-injected screw air compressors and sliding vane compressors. It is installed inside the air compressor's oil-gas tank and is responsible for efficiently trapping lubricating oil mist before compressed air is discharged from the system, ensuring clean air supply and maintaining the lubricating oil circulation of the unit.
Kernfuncties en werkbeginselen
• Deep coalescence separation.
The filter element adopts multi-layer gradient ultra-fine glass fiber composite filter media. With the airflow penetrating from outside to inside, it intercepts micron-sized oil mist particles, coalesces them into large oil droplets, which settle back to the bottom of the oil-gas tank by gravity.
• Guaranteed air quality.
It can stably filter suspended oil droplets of 0.1 to 0.3 microns, strictly controlling the oil content in exhaust air within 2 – 3 PPM, and preventing oil contamination of downstream pneumatic tools, precision instruments and drying & purification equipment.
• Reduced unit energy consumption.
The optimized pleated structure and high-porosity filter media provide a larger effective filtration area with an extremely low initial pressure drop (approximately 0.15 – 0.3 bar), effectively cutting extra power loss during the loaded operation of the air compressor.
Structural Design and Process Advantages
• High-strength pressure-resistant frame.
A thickened rust-proof perforated metal mesh support cylinder is fitted inside, capable of withstanding extreme differential pressure shocks up to 5 bar (0.5 MPa), and preventing the filter element from collapsing, deforming or breaking down under high temperature, high pressure or clogged conditions.
• Antistatische veiligheidsbescherming.
The filter flange and upper & lower end caps are stamped from anti-corrosion galvanized steel sheets with a built-in static-conductive connection design (Note: Ensure the sealing gasket is equipped with static-conductive pins or copper strips during installation) to avoid the risk of oil-gas tank explosion caused by static sparks generated by friction of high-speed airflow.
• High-temperature resistant sealing process.
It is encapsulated with high-temperature and oil-resistant special two-component adhesive, enabling long-term stable operation in a continuous high-temperature oil-gas environment of 120°C and eliminating adhesive separation and bypass leakage.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
Vervangen volgens drukdaling of onderhoudsschema. Controleer op lekkage en sealschade.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for 4900051171 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming 4900051171 or comparing it with another reference? Use these selection resources before ordering.



