
Betrouwbare filtratie begint met geverifieerde specificaties.
Air Oil Separator 1092081300
Luchtcompressor filterelementen vervangen element
Luchtcompressor filterelementen
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating
Bestellingen worden bevestigd door ons team voor prijs, compatibiliteit en levering.
Geverifieerde specificaties voor zelfverzekerde selectie.
Bevestig de installatievoorschriften aan de hand van de handleiding of originele documentatie.
| Hoogte | 620 mm |
|---|---|
| Buitendiameter | 467 mm |
| Flang-buitendiameter | 600 mm |
| Filtratieclassificatie | 0,01μm |
| Gewicht | 8 kg |
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating oil mist from clean gas in compressed air, ensuring air quality and the economic efficiency of lubricating oil circulation.
Kernprestatievoordelen
• High-precision oil-gas separation.
Adopts imported multi-layer composite superfine glassfiber filter media with a filtration accuracy of 0.01 – 1 μm and a separation efficiency as high as 99.9% – 99.99%.
• Extremely low oil content in exhaust gas.
The residual oil content of exhaust gas is strictly controlled at ≤ 3 ppm, which effectively reduces lubricating oil loss and prevents oil contamination of downstream pneumatic equipment and precision gas-consuming terminals.
• Low pressure drop and energy-saving design.
The optimized folded and wound structure provides sufficient dust holding capacity and flow area, with an initial pressure difference ≤ 0.02 MPa, greatly cutting down the energy consumption of the air compressor.
• High temperature, high pressure and corrosion resistance.
The inner and outer frames adopt high-strength rust-proof galvanized steel perforated mesh, matched with high-temperature-resistant special epoxy resin end cap adhesive. It can operate stably for a long time under normal working conditions of -10℃ to +100℃ (up to 120℃ instantaneously) and 0.7 – 1.3 MPa.
• Anti-static safety structure.
The built-in flange version is equipped with professional anti-static diversion metal pins (grounding devices) to effectively discharge static electricity generated by high-speed friction of oil and gas, eliminating the risk of static ignition inside the oil-gas barrel.
Installatienotities
Stop het systeem en laat de druk voor verwijdering vrij. Bevestig stroomrichting en afdichtingsoppervlakken vóór installatie.
Onderhoud en vervanging
Vervangen volgens drukdaling of onderhoudsschema. Controleer op lekkage en sealschade.
Vóór bestelling
Bevestig medium, debiet, druk, temperatuur, aansluiting en beschikbare installatieruimte.
Leveringsopties
Verzend- of servicepunt pick-up. Ons team bevestigt de beste regeling op basis van bestemming, gewicht en doorlooptijd.
Bevestigd voor verzending
Na onderzoek, controleren we specificaties, prijs en levering status voor levering.
Lopende ondersteuning
Voor specificatie, installatie of kwaliteit vragen, houd het product en bestel informatie beschikbaar bij contact met ons.
ONDERZOEKStuur een aanvraag voor dit product
Send your requirements for 1092081300 and our selection team will confirm compatibility, price and lead time.
Selectiemiddelen
Need help confirming 1092081300 or comparing it with another reference? Use these selection resources before ordering.



